Принцип действия
Принцип действия изделия основан на зависимости частотных характеристик чувствительного элемента и сопротивления встроенного датчика температуры от параметров контролируемой среды.
Accuracy characteristics
Technical characteristics of permissible absolute error of measurement of the fortress of the solution, depending on the performance of the product is:
- ± 0,25 % for the range of fortress of solution from 36 to 60% - execution A
- ± 0,1 % for the range of fortress of solution from 60 to 99% - execution B
Для трехпроцентного диапазона:
- ± 0,1 % for the range of fortress of solution from 36 to 60% - execution V
- ± 0,05 % for the range of fortress of solution from 60 to 99% - execution G
Limit of the allowed relative error of measurement of density at a temperature of solution and environment (20 ±5 ⁰С) constitutes ± 0,05 %.
The allowed absolute error of measurement of temperature of solution makes ± 0,5 %.
Technical characteristics
Питание изделия осуществляется от источника постоянного тока, установленного вне взрывоопасной зоны, через искрозащитный барьер БАСТИОН.
Напряжение на входе изделия (выходе барьера) от 7 до 20 В, потребляемый ток должен быть не более 30 мА.
Mass of product does not exceed 2.5 kg.
Available time for work no more 26 C.
Контролируемая среда: водноспиртовые растворы крепостью от 36 до 99 %.
Pressure of solution should not exceed 0,25 MPas (2,5 kgfs/cm2), test pressure - 0,375 MPas (3,75 kgfs/cm2).
Range of measurement of temperature of solution from 0 to plus 40 ⁰С.
The product provides delivery and reception of information with a transmission rate of 2400 bits /s. or 9600 bits /s. serial channel by exchanging type:
- -IRPS in the form of current impulses with the level of logical unit from 5 to 20 mA and logical zero from 0 to 0,1 mA,
- RS-485 in the form of voltage pulses with a level of not less than 0.8 V into 120 ohms.